Please provide a data sheet similar to the following, and our technical personnel will provide a detailed specification list of the valve and the best quotation after technical selection.
The parameters must at least include the following：
**Valve front pressure
**downstream pressure
**Medium (temperature, density, etc.)
**rate of flow
**Action mode of actuator
**Accessories (requirements for pressure reducing valves and positioners), etc
INSTRUMENT DATA SHEET CONTROL VALVE | |||||||||||
DATE | 10/3/7 | ||||||||||
order of the edition | authorized strength | check | examine and verify | ||||||||
ITEM | ************item | figure number：DWG.NO. | |||||||||
PLANT | |||||||||||
DES. STAGE | Version 1 | Page 1 of 8 | |||||||||
TAG NO. | FV-301 | Cv AT MAX.CALC.Cv | |||||||||
SERVICE | 31%HCl feed regulation | Cv SELECTED.Cv | |||||||||
LINE NO. | Line.No1 / 25-CH1-AQ1-01-I | CONNECTION TYPE | flange | ||||||||
PIPE MATERIAL | 20＋PTFE | ALLOW △P Mpa | 1.0 | ||||||||
PIPE SPECIFICATION | DN25 | OPEN％AT MAX.FLOW | 75% | ||||||||
OPERATING CONDITIONS | ACTUATOR | ||||||||||
PROCESS FLUID | 31% HCl | MODEL | |||||||||
TEMPERATURE ℃ | 25 | TYPE | diaphragm valve | ||||||||
UPSTREAM PRESSURE Mpa (G) | 0．35 | ACTION STYLE | air open | ||||||||
DOWNSTREAM PRESS. Mpa (G) | 0．25 | SPRING RANGE | |||||||||
SHUT-OFF DIFF.PRESSURE Mpa | 0．45 | TRAVEL | |||||||||
FLOW | GAS Nm3/h | MAX. | 1750 kg/h | HAND WHEEL | |||||||
VAPOR kg/h | NOR. | 1313 kg/h | AIR SUPPLY PRESS. | 140～400Kpa | |||||||
LIQUID m3/h | MIN. | 330 kg/h | PNEU.CONN.SIZE | Rc1/4 | |||||||
DSNSITY AT OPER.kg/m3 | specific gravity：1.158 | POSITIONER | |||||||||
VISCOSITY.Cp | 1.30 | MODEL | |||||||||
THERMAL CONDUCTIVITY.kcal/mh℃ | 0.412 | Input signal | 4～20mA | ||||||||
VAPOR PRESSURE Mpa | output signal | 20~100Kpa | |||||||||
CRITICAL PRESS Mpa | ACTION STYLE | ||||||||||
NOISE LEVEL | ELEC. CONN. SIZE | M20x1.5 | |||||||||
AIR FALL OPEN/CLOSE | FC | AIR SUPPLY PRESS. | 0.5Mpa | ||||||||
BODY/PLUG SPECIFICATION | AIR CONN. SIZE | Rc1/4 | |||||||||
MODEL | PROTECTION CLASS | IP65 | |||||||||
VALVE STYLE | Pneumatic lining regulating valve | Ex. CERTIFICATION | iaⅡBT4 | ||||||||
BODY MATERIAL | CS＋PTFE | ACCESSORIES | |||||||||
FLANGE STD.&RATING | HG20592 PN1.6 | REGULATOR | √ | ||||||||
FLANGE SIZE.&FACING | DN25 RF | POSITION SWITCH | |||||||||
FOLW OPEN/CLOSE | SOLENOID | ||||||||||
VALVE SIZE | POWER SUPPLY | ||||||||||
PLUG MATERIAL | SS＋PTFE | Ex. CERTIFICATION | |||||||||
SEAT MATERIAL | SS＋PTFE | ELEC.CONN.SIZE | |||||||||
SEAL RING MATERIAL | PTFE | NC/NO | |||||||||
LEAKAGE CLASS | Grade VI | LOCKED VALVE | |||||||||
FLOW CHARACTERISTIC | same percentage | SPARE CYLINDER | |||||||||
LINING MATERIAL | PTFE | ||||||||||
Modify Tags Rev. | |||||||||||
